Golden Spark For Gold, Metal & Treasure Detectors

Ph: +971 52 244 8875 (EN) Ph: +971 55 426 8455 (AR)

د.إ9,175.00

GOLD SEEKER with Pulse Induction System

The quickest, simplest, most modern, and precise method for detecting gold and coins beneath the earth.

Two systems are used by the GOLD SEEKER unit to distinguish between precious and non-precious metals.

The ground induction function was added to this unit, which is capable of generating (Eddy Current) (transmitter and receiver).

It sends a signal to the search coil when the system operates (Double D Coil), which in turn produces a spiral current signal (Eddy Current).

Category:

Description

This will produce amplifications of spiral waves to more than 1000 pules per second to help the system cover higher depths as well as analyze the target signal to determine if the metal detected is precious or non-precious.

A unique aspect of this unit is its ability to calibrate with the earth to ensure that no signals arising from soil moisture, mineral rocks or soil containing mineral salts or solid soil are disturbed.

 

After the ground balance mechanism and sensitivity, the setting is adjusted, you can begin searching by raising the search coil 2 cm above the ground and sweeping it right and left, keeping it parallel to the ground.

The unit can make a continuous beep sound when a precious metal signal is picked up, and the Green Indicator comes on.

 

If the signal is detected for a non-precious metal, an erratic sound is produced by the system and the red indicator comes on.

To increase the sensing range of the coil to reach greater depths, press the Tune button if the signal from the detected target is small, and confirm the target.

 

Sweep the search coil from right to left and left to right over each area you scan, to avoid missing small and deep targets.

 

Hover the coil slowly over the target to make sure the target form is precious or non-precious.

To ensure that the target form is precious or non-precious, stop the coil above the target while maintaining a distance of 2 cm above the ground.

The Gold Seeker equipment has a great capacity for distinguishing precious and non-precious metals in a short amount of time.
The Gold Seeker equipment has a search depth of 3.5 meters underground.

The Gold Seeker device is one of the greatest German devices, having received European CE certification in accordance with international standards, as well as an international ISO 9001 certificate.

 

Technical Specifications

Technical Specification Name Technical Specification Value
Audio Output headphones
Length Device (opened): 1513mm – Device (closed): 820 mm
Frequency Max 500 KHz
Data processing speed 16 MHz
Operating Temperature 0 ° C to 70 ° C
Operating Humidity up to 95 % non-condensing
Storage Temperature – 20C° to 70C°
Storage Humidity up to 98 % Relative Humidity
Operating Time (54 W Battery) 12 Hours
Waterproof Rating – Detector not waterproof (weatherproof only )
Waterproof Rating -Coil waterproof to a depth of (30 cm)
Coil GER30 Ø: 30 cm – GER15 Ø: 15 cm
weight total 6800 g
Device weight 2000 g
Bag weight (empty ) 3900 g
Bag dimensions 810mm x 325mm x 200mm
Battery Type Li-ion Rechargeable Battery – External Battery
Battery Output Voltage Li-ion 10.8 VDC
Battery Capacity Li-ion 54 Wh
Battery Run Time 12Hours
Battery Operating Temperature 0 ° C to 60 ° C
Battery Storage Temperature – 2C° to 70C°
Battery weight 500 g
Charger Operating Temperature 0 ° C to 50 ° C
Charger Storage Temperature – 30C° to 80C°
Charger Input Voltage 90 → 250 VAC 50→60 Hz
Charger Output 12.6 VDC / 1000 mA

Additional information

Weight 15 kg
Dimensions 83 × 37 × 25 cm
Depth

3.5m

Made In

Warranty

System Device

Pulse Induction System (PI)

Targets

All Metal, Coins, Gold, Treasure hunting